| Customization: | Available |
|---|---|
| Media: | Water |
| Certification: | RoHS, ISO, CE |
|
Still deciding? Get samples of US$ 20/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Working Voltage Range: | 3.0~4.2V |
| Operating Temperature: | -20°C~+75°C |
| Output torque: | ≥1.8N.m(3.6V) |
| Leakage Grade: | IP67 |
| Durability: | No Fault or Damage after Continuous Working 2000 times |
| Opening Valve Time: | ≤10S (DC3.0V) |
| Closing Valve Time: | ≤10S (DC3.0V) |
| Peak Current(Motor Start-up): | ≤450mA (DC3.0V) |
1.This deceleration is driven by the motor deceleration mechanism operation, and then drive the output gear to rotate back and forth to realize the valve open and close.
2.The outlet wire of the valve is 5 wires, in which the red wire is the open valve connected to the "+" pole (the closed valve connected to the "-" pole), the black wire is the open valve connected to the "-" pole (the closed valve connected to the "+" pole), and the yellow, white and blue wires are the state switch wires.
3. After the valve is in place, switch 1 is on (blue wire and white wire are on). After the controller detects the closing signal of switch 1, the pole is off, and the valve remains in the state of full open (Direct connection).
4. After the valve is in place, switch 2 is on, (blue wire and yellow wire are on) when the controller detects the closing signal of switch 2, the pole is off, and the valve is kept in the state of fully closed .
5. Please confirm that the three signal wires "white, yellow and blue" are connected before connecting the pole cord "red and black".
6. At the lowest operating voltage, the voltage applied to both ends of the valve during the system switching process shall not be less than 3V.
7. The drive current provided by the valve control circuit should not be less than the peak current of the motor.
8. If the parameters and structure of the built-in valve are changed, our company will inform you in time.
Q1: How long is your delivery time?
A:Delivery time is depends on the total quantity of order. Normally, sample can be delivered within 15 days.
Q2: Do you provide samples? Is it free or extra?
A:Yes, we could offer sample for free, but the clients has to pay for the shipping cost.
Q3: What is the MOQ of your products?
A:It normally is 1000pcs/PO of the products we already mass production. But mostly our products are customized for our customers.
Q4: Where is your factory?
A:Our factory located in Zhejiang province, we are close to Ningbo port.
Q5:What does your company need to submit a quotation?
A:After confirmed with customers on products design, we can offer mould quotation and unit price.
Q6:Why we do not have drawing here?
A:Valve always are customized to different customers. Because valves are designed according to Meter's space to assembly with .
){kind=link}