G25 Gas Meter Valve with Double Motor to Control Gas

• Customization: Available
• Media: Gas
• Certification: RoHS, ISO, CE
• Model NO.: SY-FM801-01
• Temperature: Ordinary Temperature
• Connection: Thread
• Pressure: Adjustable
• Closed: Open
• Structure: Spring
• Material: POM
• Pressure Range: 0~15kpa
• Working Temp. Range: -25~60 Degree
• Application: G25 Gas Meter
• Transport Package: Carton/Pallet
• Specification: 1.2*0.8*1.05m
• Trademark: SANYANG
• Origin: Cixi, Ningbo, China
• HS Code: 8481804090
• Production Capacity: 1000000PCS/Year

Product Description

Product Description

 

Flow-rate Range:	0.016~40m³/h
Working Pressure Range:	0~15kPa(150mbar)
Operating Temperature:	-20°C~+50°C
Pressure Loss:	≤50Pa(6m³/h)
Internal Leakage:	< 0.1L/h (at1.8~15kPa)
Opening Valve Time:	≤10S (DC3.0V)
Closing Valve Time:	≤600mS (DC3.0V)
Peak Current(Motor Start-up):	≤300mA (DC3.0V)

 

Operating Instructions

 

1.This valve is 8 lines and consists of two mechanisms.Two of the blue wires are for opening valve receiving negative electricity (closing valve receiving positive electricity),

Two white wires are positive for valve opening (negative for valve closing), and four yellow wires are state switch wires.

2.Valve opening process: The blue line of the NO.1 mechanism is negatively charged and the white line is positively charged.When the NO. 1 state switch is detected to be closed.To increase a certain delay (300mS), then stop the power supply to the NO. 1 mechanism, and then connect the negative power to the blue line of the NO. 2 mechanism, the white wire is positive.When NO. 2 state switch is detected to be closed, a certain delay (300mS) shall be added, and then stop the power supply to NO. 2 mechanism and complete the whole valve opening process with a total time of 10S.

3)Valve Closing process: Connect the blue line of valve NO. 1 with positive charge and the white line with negative charge. Then check whether the signal switch NO. 1 is disconnected. Stop power supply to NO. 1 motor valve if disconnected;Then connect the blue line of NO.2 valve with positive charge and the white line with negative charge. Test the NO.2 signal
Whether the NO. 2 switch is disconnected or not; if so, stop power supply to the NO. 2 motor valve;The valve closing process is completed, and the total closing time is 600mS.
4.Signal switch: when the valve is opened in position, the switch state is closed; when the valve is closed, the switch state is open.
5.The voltage of valve both ends shall not be less than 3V when the system open-close valve at min. Operating voltage .
6.The driving current of valve control circuit provided can not be less than the motor peak current.
 

7.If the parameters and structure of this internal valve changes, our company will promptly inform your company.

Disclaimer: Data sheet for reference only. All data and specifications are subject to change without notice to improve reliability, function, design or otherwise. For a detailed specification and specific application support please contact us anytime.

 

 

 

Company Profile

 

FAQ

Q1: How long is your delivery time?
A:Delivery time is depends on the total quantity of order. Normally, sample can be delivered within 15 days.

Q2: Do you provide samples? Is it free or extra?
A:Yes, we could offer sample for free, but the clients has to pay for the shipping cost.

Q3: What is the MOQ of your products?
A:It normally is 1000pcs/PO of the products we already mass production. But mostly our products are customized for our customers.

Q4: Where is your factory?
A:Our factory located in Zhejiang province, we are close to Ningbo port.

Q5:What does your company need to submit a quotation?
A:After confirmed with customers on products design, we can offer mould quotation and unit price.

Q6:Why we do not have drawing here?
A:Valve always are customized to different customers. Because valves are designed according to Meter's space to assembly with .